Did you treat yourself to a brand new modern hot tub? Or wish to splash out and purchase one so that you may enjoy it under the summer sun in your back garden? Both ways, you'll want to make sure that your hot tub is looked after and well maintained. You can check this beginner's blog on some ways to take proper care of your 6 person inflatable hot tub. 

Following are a few straightforward steps to ensure that your hot tub is in good condition and well maintained. Also that the tub is always ready for use whenever you desire! 

The water chemistry is crucial, which aids in ensuring that the hot tub is safe to use. You may examine the water chemistry simply with a drop test or by using testing strips. You'll require a water reading for the pH, alkalinity, chlorine, and bromine. Utilising a standard filter in the hot tub aids in removing debris and provides a high cleaning power level to maintain pristine crystal clear water. 

It is advisable to clean and wipe the hot tub's surface often. You shouldn't use daily household cleaning products as they could damage your hot tub. You will need to invest in some standard spa cleaning sprays. 

Whilst you carry out a complete hot tub refilling procedure, it is advised to use a microfibre cloth for wiping the spa body and shell top. Moreover, emptying a hot tub can turn out to be time-consuming, yet it doesn't actually have to be, particularly not when you're utilising an ergonomic electric pump.

Not a single person will like soaking in a hot tub that is dirty and unhygienic. Therefore, a standard filter is crucial for a refreshing soak in your hot tub. It is advisable to purchase some extra filters so that whilst you’re cleaning the filter, one of the additional ones can be used in your hot tub. Using the filters alternately helps in maintaining fresh water. You have to soak the filter in a cleansing solution which helps in eliminating all grease that builds inside of it. Furthermore, make sure you go through the instructions for the hot tub ahead of the filter removal.

A standard cover for a hot tub is a crucial accessory, as this aids in heat preservation which then leads to keeping ongoing expenses down. The tub's covering should be placed on at all times whilst the spa is not in use. This shall keep the hot tub water at optimum temperature plus ensure that it is readily usable at any time of the day with minimum running expenses. 

Whilst testing the water and adding chemicals, be sure to leave the cover off for around 15 to 20 minutes so that the gases can disperse. Lastly, clean the hot tub water by using suitable cleaning items like wipes and sprays.

Caring for a brand new spa sounds quite daunting. Yet always keep in mind that when you feel you aren’t doing something right, you may always drain the tub’s water and begin all over again!