Thermodynamic Steam Trap Manufacturer in India
Specialityvalve is one of the best Thermodynamic Steam Trap Manufacturer in India. We supply to Telangana, Haryana, Punjab and Rajasthan. A Thermodynamic steam trap is a device used to discharge two types of gases i.e., condensates and non-condensable gases with a negligible loss of live steam. Thermodynamic Steam traps are automatic valves. They open, close, or modulate automatically. It can only be operated in very high temperatures and pressures.
The thermodynamic steam trap is an extremely robust steam trap with a simple mode of operation. The trap operates using the dynamic effect of the flash steam as it passes through the trap. The only moving part is the disc above the flat face inside the control chamber or cap. On start-up, incoming pressure raises the disc and cools condensate immediately and then discharges from the inner ring, under the disc, and through three peripheral outlets.
Hot condensate traveling via the inlet route into the chamber under the disc reduces pressure and releases a high-velocity flash system. At the same time, the flash steam is trapped in the upper chamber and the pressure above the disc equals the pressure being applied to the underside of the disc from the inner ring. Eventually, the disc is raised by the higher condensate pressure, and the cycle repeats.
Advantages of the thermodynamic steam trap:
It can operate across the entire working range without any changes
It has a large condensate capacity for their size
It can be used in high pressure and superheated steam
Easy to maintain
It is not affected by water hammer.
Disadvantages of the thermodynamic steam trap:
It will not work in low differential pressures
The discharge of the trap can be noisy
The inlet pressure builds up slowly
Industries of thermodynamics steam traps:
Petrochemical Industry
Chemical Industry
Textile Industry
Description:
Material: Ductile iron, Cast Iron, Carbon Steel, cast steel (WCB, WCC, LCC, LCB, WC6, WC9), Stainless Steel (SS316, SS304, CF8).
Class: 150 - 1500, PN10 – PN250.
Size: ½” to 2”.
Ends: Socket weld, butt weld, flanged, threaded.
Specialityvalve is the leading Thermodynamic Steam Trap Manufacturer in India. It is famous for its premium quality products which comes in various material and sizes. All the products are tested according to requirements and standards of the clients.
